Detailed Product Description

FUNCTION
INJECTOFLUX 842D is a sodium bearing flux which has been specifically formulated for use with conventional types of flux injection Machines. When introduced into the molten aluminum in this manner. lt degasses, removes oxide and non-metallic inclusions in one operation. The dross formed from this treatment is very hot and contains a very low aluminum content

RECOMMENDED APPLICATION
Injectflux842D is loaded into the Flux injection Machine. The injector is the programmed to deliver flux for various periods of time depending on the type of casting method used. The flux injection time will depend on the efficiency of the type of injector being used, but the following table indicates the amount of flux required to remove both oxide and hydrogen form the. Melt using a charge of 60% ingot to 40% return scrap.

Pressure Die casting 0.05% injectoflux 842D
Gravity Die casting 0.10% injectoflux 842D
Sand Casting 0.15% injectoflux 842D

On completion of the injection treatment, rabble dross into metal surface allow melt to stand for at least one minute before skimming cleaning and casting.

PACKAGING

30kg paper bags

HEALTH AND SAFETY

When handing use a suitable barrier cream on hands

Avoid inhaling dust or fume

In the event of eye contact, irrigate with clean water for 15-20minutes

Wash with soap and water after handling